Riotoro CR1288 PRISM, Installation Manual

Page: 25 / 43

CR1288 PRISM
Installing the Power Supply
The power supply unit (PSU) bay is located on the bottom of the
case. To access the PSU remove the right side panel (as seen from the
front).
- Slide the PSU in the bay with the fan facing downward.
- Push the PSU toward the case’s rear with the case and PSU screw
aligned.
- Attach the PSU to the case with the provided screws.
- Connect the PSU cables to your motherboard and drives.
- Attach a PSU SATA power cable to the case's power connector.
Chapter 2 Ready, Setup, Go 23
150 mm
85 mm 175 mm