Riotoro CR1288 PRISM, Installation Manual

Page: 22 / 43

CR1288 PRISM
Attaching Cables
Connect the Top Panel Cables
The CR1288 Prism’s front panel switches, LEDs, and USB ports have wire
leads that need to be attached to header pins the motherboard. Refer to
your motherboard manual to locate the proper motherboard header pins
and attach the cable connectors listed below.
Tip:
- The LED leads marked positive (+) or negative (–) and must be connected
to the corresponding pins on the motherboard. The orientation of the switch
connectors does not matter.
20 Chapter 2 Ready, Setup, Go
USB 3.0
USB 2.0
HD AUDIO
POWER SW
RESET SW
HDD LED
POWER LED +
POWER LED -