16
EcoGrow Assembly Instructions
Cover the Walls
1
Put the R1 round profiles in place.
2
Add the E1 oval profiles until the frame is
completed.
3
Insert two pins in each column to lock
them in place. Do not insert pins in the
inner (panel) channels of the column
profiles.
4
Make sure that the plastic ID strip of a PN
70 panel faces out, and put it in place by
gently curving it so that it enters the side
channels of the columns.
5
Lower the panel towards the frame and slide it into the channel of the base.
6
Continue with this procedure until all of the PN70 panels on the side of the greenhouse and the PN71 panels
for the front and back of the greenhouse are finished.
7
Lock the roof in place with pins and remove the ID strips from the panels.
1
2
3
4
6
7
5
