19
Attach the Door
1
Attach the LI6
Door Latch to the
lower portion of
the door frame.
2
Remove the four
indicated pins
using the glazing
tool.
3
Attach one end of
the Upper Door
Hinge with an
AS80 screw and
wing nuts through
the pin holes in
the connectors.
4
Place the door on
the lower hinge.
5
Rotate the Upper
Door Hinge down
so that the pin
enters the
corresponding
hole in the door.
6
Secure the
door to the
upper door
lintel by
screwing in the
second AS80
screw and
wingnut
through the
pinholes.
7
Screw the
Dow2 Door
Holder where
shown by first
removing the
pin. The end
of the door
holder should
be flush with
the inner
surface of the
round profile.
8
To release the door pull the top of the LI6 Door Latch.
Note:
Use the LI6 Door Latch to keep the door closed against the wind. We do not recommend closing the
door when you are inside.
1
2
4
3
5
6
7
8
