13
1
Place RD3
elements where
shown by placing
one end in the
channel and
pushing it down
along the length of
the profile.
Note:
You may find
it easier to insert RD
elements into
profiles by pushing
them in from the top
while rolling the
element downwards.
2
Place each PN76
and PN78 panel in
place by sliding
one corner into
the RD3 glazing
element and then
continue until it is
fully inserted and
lying flat. Make
sure that the
plastic ID strip is
facing the outside.
3
Assemble the two
WINH31 handles
of the WIN34
Roof Vent using
the included pins
and place the roof
vent in one of the
middle spaces.
Note:
Assembly
instructions for
additional roof vents
are included in the
packaging.
1
2
3
