Rinnai
6
Wi-Fi Smart Port OIM
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
NOTE
•
The supplied remote control is used to configure and connect to Wi-Fi.
•
The supplied remote should be retained in the event the connection needs to be established or set up needs to
be repeated.
•
The supplied remote control can also be used to operate the system if the original system was supplied with a
remote control. Point remote control towards the Smart Port Receiver.
NOTE
A NOTE ON ILLUSTRATIONS
The illustrations used in this manual are for explanatory purposes only and the shape of your unit may vary slightly
from that which is shown in this manual.
•
The ‘Nethome Plus’ App configuration and user screens are subject to change.
NOTE
With our policy of continuous improvement, we reserve the right to change, or discontinue at any time, specifications,
design, illustrations and content without notice. Pictures for illustration purposes only.
