Rinnai 16
Wi-Fi Smart Port OIM
5. Determine path of Looms to exit Backing Plate.
6. For rear exit of Backing Plate, remove and discard the
perforated rectangle Knock-Out Plate as shown in Figure 18.
Figure 18.
7. For above or below Backing Plate, see route options as
shown in Figure 19.
Figure 19.
Remove Knock-Out Plate
Discard
OR
8. Fasten the Backing Plate of the Smart Port
•
For exposed mounting, fasten the Backing Plate on the wall
with the screws and plugs supplied. Refer to Figure 20.
Figure 20.
Wiring the Smart Port
A. For exposed mounting, two outlet positions
Figure 21.
Backing Plate
Screws
(M4×20)
Note
orientation
Top side
wire outlet
Bottom side
wire outlet