Rinnai 13
Wi-Fi Smart Port OIM
6. Fasten the Backing Plate of the Smart Port
•
For exposed mounting, fasten the Backing Plate with the
screws and plugs supplied if required. Refer to Figure 9.
Figure 9.
Wiring the Smart Port
A. For exposed wire mounting, two outlet positions
Figure 10.
Backing Plate
Screws
(M4×20)
Note
orientation
Top side
wire outlet
Bottom side
wire outlet
B. Shielded Wiring
Figure 11.
CAUTION
Avoid water entering into the Smart Port. Trap
loom and then putty to seal the connection wires
during installation. See Figure 12. When installing,
save a length of loom for convenience to remove
the Smart Port during maintenance.
Figure 12.
Wiring through the wall
Wiring hole and wall hole
Diameter of wall hole:
Φ20mm
Remove
knock-out
plate
Putty
(field
supplied)
Trap
Trap
Putty
(field
supplied)
