Rinnai Smart Port WF-60A1 Operating & Installation Manual Download Page 35

Rinnai 35 

Wi-Fi Smart Port OIM

9.0  WARRANTY

TERMS OF WARRANTY – AUSTRALIA

Rinnai Australia Pty. Ltd. ABN 74 005 138 769, 100 Atlantic 

Drive, Keysborough VIC 3173.

 

NOTICE TO CONSUMERS UNDER AUSTRALIAN 

CONSUMER LAW

Our goods and services come with guarantees that cannot be 

excluded under the Australian Consumer Law. 
For a major failure with a good, you are entitled to a replacement 

or refund and compensation for any other reasonable 

foreseeable loss or damage. If the failure does not amount to 

a major failure and if the goods fail to be of acceptable quality, 

you are also entitled to have the goods repaired or replaced.
For a major failure with the service, you are entitled to cancel 

your service contract with us and obtain a refund for the 

unused portion, or to compensation for its reduced value. You 

are also entitled to be compensated for any other reasonably 

foreseeable loss or damage. If the failure does not amount to a 

major failure you are entitled to have problems with the service 

rectified in a reasonable time and, if this is not done, to cancel 

your contract and obtain a refund for the unused portion of the 

contract.

The benefits provided by this Warranty are in addition to any 

other rights and remedies available to a consumer under the 

Australian Consumer Law and any other law which may apply 

to the goods and or services.

WARRANTY: Rinnai Smart Port 

This product is warranted for a period of one (1) year from the 

date of purchase, in accordance with the Terms and Conditions of 

Warranty detailed below.

IMPORTANT – TO BE READ IN CONJUNCTION WITH THE 

TERMS AND CONDITIONS OF WARRANTY

• 

The fitness for purpose of the Rinnai Smart Port and ensuring 

suitable Wi-Fi connectivity is the sole responsibility of the 

Qualified Installer and or Purchaser.

• 

The  Smart  Port  must  be  installed  by  a  suitably  Qualified 

Installer in accordance with local and national wiring codes, 

otherwise the warranty will be void.

• 

Always refer to the Installation and Owner’s Manuals to ensure 

the correct installation and operation procedures have been 

followed.

• 

The Smart Port is to be installed indoors only; warranty 

excludes damage caused by the elements such as rain, wind, 

lightning, or harmful environmental conditions.

• 

Warranty on the Smart Port is separate from the warranty on 

associated appliances, equipment and ancillary components.

• 

For full Terms and Conditions, go to the Rinnai website, 

www.rinnai.com.au

Summary of Contents for Smart Port WF-60A1





































Reviews: