7
Before carrying out any cleaning or maintenance activities, ensure that the appliance is disconnected from the main power
supply.
It is important to clean and/or replace the filters at appropriate intervals as grease deposits build
Ͳ
up increases the risk of fire.
Cleaning
the
A
ppliance
B
ody
Clean the extractor hood using warm detergent solution and a soft damp cloth. After cleaning, dry it using a lint
Ͳ
free cloth.
Avoid using corrosive or abrasive products that could damage the surface.
Clean
ing
the
O
il
C
up
(Fig. 16 & Fig. 16. 1)
Remove
the
grease
filter.
Remove
the
oil
cup
and
clean
by
using
warm
detergent
solution.
Leave
it
to
dry
before
refitting.
MAINTENANCE AND CARE
Grease
F
ilter
(Fig. 14)
Grease filters are used to absorb the grease particles formed during cooking
process. Do not operate the extractor hood without a grease filter.
The filters must be removed and cleaned every time you see the orange
indicator blink on the control panel display window or depending on how
often the appliance is used. Clean the filter either by hand or in the
dishwasher. Take care not to bend the filters during washing.
If by hand washing, soak the filters in hot detergent solution (approx. 40
o
C)
to simplify the removal of grease. Brush the filters, rinse thoroughly and
leave it to dry before refitting.
If by dishwasher, select an appropriate wash program. Leave it to dry before refitting.
Note: a slight discolouration of the filter may occur.
Clean the housing for the grease filters by hand only, using warm detergent solution.
Removing and inserting the grease filters, please see diagram.
Insert the bottom of the grease filter into the neck of bottom cover and hold the filter by both hands.
Press the lock and pull it downward, release the hands and feel the “click sound”. Remove in the reverse step.
Charcoal
F
ilter
(where
applicable)
(Fig. 15 & Fig. 15. 1)
The charcoal filters should be replaced when you see the orange
indicator light lights up on the control panel display window or if it is
noticeably dirty or discoloured, usually after 2 months depending on
the conditions of use.
These filters are not washable and cannot be restored. To ensure that
this appliance functions effectively, regular maintenance is necessary as
clogged filters restrict airflow and may cause the motor to overheat.
Removing and inserting the charcoal filter, please see diagram.
Remove the grease filter
.
Remove the saturated charcoal filter from the housing as shown. Turn
the charcoal filter anti clockwise and pull down.
Reverse the procedure when refitting the new charcoal filters.
Fig. 15
Fig. 14
Fig.
15.1
Fig. 16
Fig.
16
. 1
