Rinnai Energysaver RHFE-1004FTR, How To Use Manual, Page: 13 / 36

– 12 –
SETTING CLOCK
1
When the appliance is first plugged in or after a
power failure, the Digital Display will show
Press the Set Times button once. The Clock
Indicator will flash.
Timer 2 Timer 1
AM
PM
Override Economy
Set
Set Times ON / OF
Room
Temp
Time
Timer 1
Timer 2
Clock
on off
Function Lock
3
Press the Set Times button five times to lock in and
complete setting the time. The Clock and Timer
indicators will go out. A small indicator on the
Digital Display will flash to show that the clock is
operating.
Timer 2 Timer 1
AM
PM
Override Economy
Set
Set Times ON / OF
Room
Temp
Time
Timer 1
Timer 2
Clock
on off
Function Lock
2
Press and hold the “ ” button ; the minutes will
begin to change first, then the time will change by
whole hours. Release the button when AM10:00
shows on the Digital Display. Confirm that you have
selected AM. A small indicator on the left hand side of
the Digital Display indicates the AM setting.
Press and hold the “
” button again, release the
button when AM10:35 shows. If you go past AM
10:35, then the “
” button can be used to change the
time settings in reverse.
Timer 2 Timer 1
AM
PM
Override Economy
Set
Set Times
ON / OF
Room
Temp
Time
Timer 1
Timer 2
Clock
on off
Function Lock
AM
PM
Set
Set Times
ON / OF
Room
Temp
Time
Timer 1
Timer 2
Clock
on off
Function Lock
When the appliance is first plugged in and then turned on, the Digital Display will show
.
As an example let’s set the clock to 10:35am.
(See page 4 for complete Control Panel Layout.)