Rinnai Energysaver RHFE-1004FTR, How To Use Manual, Page: 12 / 36

– 11 –
OVERRIDE FUNCTION
1
To operate the Override simply press the Override
button. The Override indicator will flash.
Timer 2 Timer 1
AM
PM
Override Economy
Set R
Temp
Time
Function Loc
2
To manually de-activate the Override simply press
the Override button again. The Override indicator
will go out, and the heater will return to standby
mode.
Timer 2 Timer 1
AM
PM
Override Economy
Set
R
Temp
Time
Function Loc
The heater will continue to operate on Override until the Override button is pressed again, or
one of the Timers takes over operation of the appliance.
This means that the Override mode will automatically drop out if a programmed starting time
is reached. The appliance will then return to operating at times programmed into the Timer(s).
This function is used to manually override the current operation of the heater. For example ; if
the heater is in standby mode (ie. between finishing time and starting time of a Timer) and
the Override button is selected, then the heater will begin to operate, and heat the room.