Rinnai brivis ZonePlus, Owner'S Manual

Page: 41 / 50

38
i) installation of third-party components that may be attached to the Product. These include, but are not limited to,
control wiring, ducting, return air filter(s) grille, register, diffuser, zone motors, controls/thermostats, pipe work
and fabricated or added components. These items remain solely the responsibility of the Qualified Installer;
j) installations where electrics/electronics may be subjected to moisture/chemicals (e.g. swimming pools or
nurseries);
k) any repair, which is needed as a result of an accident, misuse, abuse or negligence;
l) Product that is utilised in an environment (indoor and outdoor) outside its specified operating range; and
m) fair wear and tear to the Product.
n) On-site labour warranty on portable (non-fixed installation) Products – In respect of such Products the
Purchaser must return the Product to the supplier for repair or replacement).
6 Limitations
1. Third parties are often involved in providing advice to consumers about the climate control solutions best suited to
the consumer's needs. Any advice or recommendations given by such parties, including advice about Product
fitness for purpose and overall system design, sizing and application are not the responsibility of Rinnai. This
includes but is not limited to the heat load calculations, airflow and system balancing.
2. This Warranty does not apply to any Product installed at an Installation Site which is outside Australia.