Rinnai brivis ZonePlus, Owner'S Manual

Page: 19 / 50

16
3.0 SINGLE TEMPERATURE SET POINT
SYSTEMS (STSP)
A STSP system provides you with the capability of setting one
temperature for Heating and another temperature for Cooling.
The zone temperature set point is the same across all
Networkers and/or Temperature Sensors.
3.1 STSP Quick Start Guide
The following quick start procedure enables you to use your
ZonePlus before you learn all the details of the system’s operation.
Please ensure your dealer has provided you with details on enabling
zones, the capabilities of your Heating and Cooling system, and the
maximum or minimum number of zones that can be operated
simultaneously for Heating or Cooling design conditions (see
Table 2 ).
Quick Start Guide: Heating
1. Press the
Mode Key “M” until “Heating” is displayed at the
bottom of the screen
2. Press the On/Off button to turn the system on
3. Increase the desired temperature set point to above the room
temperature by turning the rotary dial clockwise
4. Press Key “4” to enable and disable zones “A” & “B” for heating.
An Arrow will appear adjacent to Key “ 4 ” on the screen to inform
you that the zone is enabled
5. Press Key “5” to enable and disable zones “C” & “D” (if
installed) for heating. An Arrow will appear adjacent to Key “5”
on the screen to inform you that the zone is enabled
Quick Start Guide: Cooling
1. Press the Mode Key “M” until “Cooling” is displayed at the
bottom of the screen
2. Press the On/Off button to turn the system on
3. Decrease the desired temperature set point to above the room
temperature by turning the rotary dial anticlockwise
4. Press Key “4” to enable and disable zones “A” & “B” for cooling.
An Arrow will appear adjacent to Key “ 4 ” on the screen to inform
you that the zone is enabled
5. Press Key “5” to enable and disable zones “C” & “D” (if
installed) for cooling. An Arrow will appear adjacent to Key “5” on
the screen to inform you that the zone is enabled