Rinnai brivis ZonePlus, Owner'S Manual

Page: 21 / 50

18
3.2 Setting the Time & Day
Please refer to section 2.2
3.3 User Settings
Please refer to section 2.3
3.4 Zone Identification
Your Dealer has divided your home into zones that can be operated and
controlled separately. The exact configuration of your ZonePlus system
will determine the programming features that are enabled, as well as the
number of zones that can be heated (or cooled) simultaneously. You
may operate your ZonePlus system in either
“Auto Program” or
“Manual”.
Diagram 12: NC-6 Heating Operation Display
When the system is ON , only the zones that have been installed and
configured by the installer will be displayed on the screen adjacent
to
Keys “4” & “5” , as shown in Diagram 12 .
The zone Arrows:
• Solid indicates the associated zone is Heating (or Cooling) as the
zone set temperature has not been satisfied
• Flashing indicates the associated zone set temperature has been
satisfied
3.5 Manual Operation
Operating your system in “Manual” will require you to turn zones ON
and OFF as desired, all set to a single temperature set point.
Diagram 13: NC-6 Manual Operation Display
Note: The room temperature of a zone containing a NT-1
Sensor cannot be viewed on a NC-6 Networker Controller in
STSP systems.