6. Using the arrows in the top right corner, scroll the pages and click
the first IP Router page, as shown here:
The following information needs to be entered onto this page (this
will be supplied by your network administrator).
IP Address Enter here the router’s IP address for the Ethernet
Network 1 (this will be the gateway for all Token Ring devices).
TCP/IP Subnet Mask Enter here the subnet mask for the Ethernet
Network 1.
Default Gateway IP Address Enter here the IP address of another
router. This will allow packets for unrecognized IP addresses to be
redirected to that router.
DNS Name Server Address Enter here the IP Address of the DNS
server if required (optional).
Local IP Address Enter here the router’s IP address for the Token
ring Network 2 (this will be the gateway for the Ethernet network).
Local IP Subnet Mask Enter here the subnet mask for the Token
ring Network 2.
Click Apply to register the new information. Both networks should
now communicate with the router.
Back to TOC.
RD2004112901 | Eth_Tring_Rout_Man.doc
- 8 -