Introduction
Ringdale’s 19-inch Ethernet -Token Ring Network Router provides
a solution for connecting an entire Ethernet network and an entire
Token Ring network. Printers, PCs and network peripherals
attached to both networks can interact with each other.
Ethernet connection is made with an RJ-45 connector, configured
to allow a straight cable to run to the 10baseT Ethernet Network.
Token Ring connection is made using a type 1 cable on a 9-way
DB connector or type 3 cable on an RJ-45 connector. The router
has the ability to automatically sense which Token Ring connection
is used as well as the Token Ring speed, at either 4MHz or 16MHz.
The router is designed to easily mount into an industry standard 19-
inch rack system for convenience. The router is configured and
managed remotely using Ringdale’s PeripheralVision® network
management software that can be installed on any Windows™
95/98/ME/NT/XT/2000/2003 PC on the Token Ring network.
Follow the steps detailed in this manual for quick installation of the
Ethernet -Token Ring Network Router.
Back to TOC.
RD2004112901 | Eth_Tring_Rout_Man.doc
- 4 -
