Rinex GA8500, User Manual

Page: 36 / 39

GuideTRAX User Manual Addendum Page 28 Rev B
P/n 1-1293
3.4 The Launcher
The Launcher comprises of several utilities to assist in the configuration
of the GuideTRAX V3 software and the GA8500 system.
3.4.1 Opening the Launcher
The Launcher is not accessed directly from the GuideTRAX V3 software
as it is not used on a regular basis. The Launcher must be started from
the power Off position, then hold the Power Control button, shown in
Figure 2-2, for approximately two seconds until two short beeps are
heard. Releasing the Power Control button will then cause the GA8500
to start into the Launcher program. The main screen of the Launcher
program is shown in Figure 3-6.
Figure 3-6: The Launcher Main Screen