Rinex GA8500, User Manual

Page: 35 / 39

GuideTRAX User Manual Addendum Page 27 Rev B
P/n 1-1293
3.3 Setting the Remote Buttons
The GA8500 has four user configurable buttons which can be used as
“Hot” keys or buttons for selected functions. The buttons, 1 to 4, are
shown in Figure 2-3. The buttons can be programmed using the Remote
Buttons function of the GuideTRAX V3 software.
In addition to this the AS300 Hub has one Remote Input line which is
also user configurable, the same as the “Hot” keys.
Programming the Remote Buttons
The user-defined buttons can be programmed using the Remote Buttons
function of the GuideTRAX V3 software.
Access:
SETUP-MORE REMOTE BUTTONS
The default settings for each button are shown in Figure 3-5.
Figure 3-5 Buttons Setup Window
These settings can be changed for each button by touching on the value
assigned to that button. The functions which may be assigned to the
buttons are listed in Table 6-1 of the GuideTRAX V3.2 User Manual.
Remote Input
The Remote Input line is configured to the Control Port D of the AS300
Hub as shown in Figure 2-4. The Remote Input line requires a
momentary 12Vdc, “pulse” signal to toggle the switch On and Off.