Rinex GA8500, User Manual

Page: 31 / 39

GuideTRAX User Manual Addendum Page 23 Rev B
P/n 1-1293
3.2 Setting the Remote Master Switch
In order to record where a treatment, or application, is actually started
and stopped GuideTRAX V3 can be configured in several formats for
individual user requirements. This action is often referred to as the
Master Switch, or if remotely connected to the GA8500, as the Remote
Master Switch.
GuideTRAX V3 is compatible with numerous flow controllers and can
detect when the flow controller Master Switch has been toggled. This
then starts and stops the treatment recording within GuideTRAX V3.
Furthermore it is possible to sense when a 12Vdc switch has been
toggled by observing the voltage applied at the switch. Detecting when
the voltage has been set to 12Vdc will start the treatment recording
within GuideTRAX. The AS300 Hub incorporates voltage sensing for a
constant 12Vdc source, or a pulse 12Vdc switch to start and stop
treatment recording.
A summary of the options for the use of a Master Switch is shown in
Table 3-1.