background image

 

 

Copyright Notice 

All rights reserved.  No part of this publication may be reproduced, stored 
in a retrieval system, or transmitted in any form or by any means, 
electronic, mechanical photocopying, recording, or otherwise, without the 
prior written permission of RINEX Technology. 

Disclaimer 

No liability is assumed with respect to the use of the information 
contained herein.  While every precaution has been taken in the 
preparation of this publication, RINEX assumes no responsibility for 
errors or omissions nor is any liability assumed for damages resulting 
from the use of the information contained herein.  Further this publication 
and features described herein are subject to change without notice. 

Use of this system is strictly limited to providing steering assistance to 
the operator who must remain in control of the vehicle at all times. 

RINEX, including its officers servants and agents, does not make any 
representation to any party and will not accept any responsibility or 
liability whatsoever for any loss or damage of whatever nature suffered 
by any such person or corporation choosing or seeking to use this 
system or any part thereof. 

By use of this system you agree that RINEX is not liable or responsible 
for any damage whatsoever to the vehicle, any property, personal 
injuries, or death that may result from the use or abuse of this system. 

Summary of Contents for GA8500








































Reviews: