Rinex GA8500, User Manual

Page: 32 / 39

GuideTRAX User Manual Addendum Page 24 Rev B
P/n 1-1293
INPUT REQUIRED DESCRIPTION MASTER SWITCH
User touches
screen Touch vehicle icon in map screen, or
vehicle bonnet in Virtual Road screen on
touch screen Touch
12Vdc pulse from
external device
Connect sense wire from switch to Control
Port D. Ensure that Remote Input is be
set to Rove / Record in Remote Buttons
Touch
12Vdc (constant)
from external device Connect sense wire from switch to Control
Port C. Sense
Master Switch on
flow controller with
AutoSPRAY Connect relevant AutoSPRAY cable to
AutoSPRAY port Sense
Master Switch
(dipole) on flow
controller with
AutoSPRAY
Connect relevant AutoSPRAY cable to
AutoSPRAY port
Sense Dipole
Master Switch on
flow controller
(serial protocol)
Connect relevant RINEX data cable to Port
A. Flow controller (serial interface
protocol) must be compatible with RINEX
systems, set correct Flow Controller in
Flow Controller page
Flow Control
Master Switch on
flow controller
(CANbus protocol)
Connect relevant RINEX data cable to Port
CANbus. Flow controller (CANBus
interface protocol) must be compatible with
RINEX systems, set correct Flow
Controller in Flow Controller page
Flow Control
Table 3-1: Remote Master Switch Summary