22
2001475_A
Rimage Producer™ III User Guide
7100N/8100N/6100N/6100
c.
If the disc is not centered front to back on the print pad, align the
printer
front to back by turning the
front to back
alignment screw
until the gap between the raised edge of the disc retainer and the disc is correct.
7.
Manually, slowly raise the
lift arm
away from the printer tray.
8.
Press the
printer button
. The printer tray closes.
9.
Press the
disc release button
. The gripper releases the disc.
Tip:
Place your hand under the disc to catch it.
10.
Close the
front
door
. The autoloader is ready for use.
Everest:
0.063" gap at the front
Disc Retainer
Gap
Prism:
Disc hangs over the front edge of the print pad by
0.010" – 0.015"
Print Pad
Gap
En
gli
sh
Summary of Contents for Producer III 6100
