8
CONTENTS OF PACKAGE
Model 10-324TG 14” Bandsaw is shipped complete in one box.
Unpacking, Checking Contents & Clean-up
1. Carefully remove all contents from the shipping carton. Compare the contents with the list of contents to
make sure that all of the items are accounted for, before discarding any packing material. Place parts on a
protected surface for easy identification and assembly. If any parts are missing or broken, please call RIKON
Customer Service (877- 884-5167) as soon as possible for replacements. DO NOT turn your machine ON if
any of these items are missing. You may cause injury to yourself or damage to the machine.
2. Report any shipping damage to your local distributor. Take photographs for any possible insurance claims.
3. With the help of another person, carefully lift the Bandsaw from the packaging and place it on a level floor.
4. Clean all rust protected surfaces with ordinary house hold type grease or spot remover. Do not use;
gasoline, paint thinner, mineral spirits, etc. These may damage painted surfaces.
5. Apply a coat of paste wax to the table to prevent rust. Wipe all parts thoroughly with a clean dry cloth. Be
careful, as the pre-installed bandsaw blade has sharp teeth and may cause injury if touched.
6. Set packing material and shipping carton aside. Do not discard until the machine has been set up and is
running properly.
TABLE OF LOOSE PARTS
A
B
C
CONTINUED ON PAGE 9
D
A. Bandsaw Frame Assembly
B. Base Stand Assembly - see page 10 for loose parts list
C. Blade Tension Hand Wheel
D. Hand Wheel for Raising Blade Guard
E. Hand Wheel for Tensioning the Drive Belt
F. Manual - not shown
E
Summary of Contents for 10-324TG
Page 43: ...43 OPERATION...
