Chapter 3 Demo Board Applications
RIGOL
User’s Guide for DS6000 Demo Board 3-37
Set the check mode to “Odd” in the decoding menu during the above-mentioned data trigger. As
data on the Demo board does not contain check bit, red error identifier is displayed.
Figure 3-42 RS232 Trigger and Decoding (Odd Check)
Note: the output signal of pin UART is the same with the RS232_TX signal except that its polarity is
positive. The same demonstration result can be obtained using the above method (set the polarity to “+”
in protocol decoding).
Error Identifier
www.
GlobalTestSupply
.com
Find Quality Products Online at:
