Chapter 3 Demo Board Applications
RIGOL
User’s Guide for DS6000 Demo Board 3-27
3.2.9 Narrow Burst Signal
1.
Signal Explanation
Signal Output Pin:
PULSE_OUT
Narrow pulse signal with 100us period and 2ns width.
2.
Functions
Pulse trigger
3.
Demonstration and Result
Connect the signal output pin PULSE_OUT and GND to CH1 of the oscilloscope properly using
the probe.
Set the trigger type to “Pulse”, the trigger condition to <4ns, the trigger mode to “Auto” and the
vertical scale to “1 V”; adjust the vertical position and trigger level to appropriate values. The
demonstration result is as shown in the figure below.
Figure 3-31 Narrow Pulse
www.
GlobalTestSupply
.com
Find Quality Products Online at:
