RIGOL
Chapter 3 Demo Board Applications
User’s Guide for DS6000 Demo Board
3-28
3.2.10 Glitch Signal of Sine
1.
Signal Explanation
Signal Output Pin:
GLITCH_SINE
The sine frequency is 500kHz, the glitch width is 2ns, the glitch occurrence period is about 90us
and the position of the glitch is not fixed.
2.
Functions
Pulse trigger, multi-level gray scale
3.
Demonstration and Result
Connect the signal output pin GLITCH_SINE and GND to CH1 of the oscilloscope properly using
the probe;
Set the trigger type to “Pulse”, the trigger condition to <10ns and the trigger mode to “Auto”;
adjust the time base to 100us and set the acquisition mode to “Normal” and the vertical scale to
“500 mV”; adjust the vertical position and trigger level to appropriate values to make the
oscilloscope trigger stably. The demonstration result is as shown in the figure below and users
can view the interval time between glitches. All the adjacent glitches can be captured.
Figure 3-32 Sine Glitch Signal
www.
GlobalTestSupply
.com
Find Quality Products Online at:
