39
6.1 Getting ready to run the job
Once the machine is heated up and it is ready to use, prepare the job for binding.
1.
Parameters: First adjust the parameters of the machine, such as
turning on the milling, gule temperature, binding time, book block position, as well as
the opening distance of the book clamp.
MILLING: To reach the perfect spine preparation of the book, it is essential to have
a proper milling.
Please use only single sheet book block in this machine since its milling system
is designed only for roughing the spine of the book block and it mills from the spine
only 0.5 mm to make sure that all the pages are on the same level.
Make sure that folded signatures are not used in this machine since it would
require more milling depth to make sure that the glue reaches all the pages.
