45
4-3
Measurement Modes and Start Measuring
This instrument offers three measurement modes.
Measurement mode is selected form SETUP menu. See “5-1 Measurement Setup
[MEASURE]”.
The operation of each measurement mode is shown on the following table.
Measurement subject
Measurement mode
REF
A:Auto measurement mode
See “4-3-1 Automatic Measurement Mode
(AUTO, AUTO2)”.
Press the start switch once, place the
bright spot within the alignment mark, and
focus the mire ring.
When the instrument judges that the
measurement values are stable, the
measurement will end automatically.
Start
↓
Fog
↓
REF measurement
(Measure 5 times at least)
↓
Auto stop
A2:Auto measurement mode2
See “4-3-1 Automatic Measurement Mode
(AUTO, AUTO2)”.
As same as Auto measurement mode,
but, do Fog on each REF measurement.
Start
↓
Fog
↓
REF measurement
↓
Fog
↓
REF measurement
・
・
(Measure 5 times at least)
↓
Auto stop
C:Continuous measurement mode
See “4-3-2 Continuous Measurement
Mode (CONT)”.
As with the automatic measurement
mode, can be interrupted by a press of the
start switch.
Start
↓
Fog
↓
REF measurement
(Continuous measurement)
↓
Stop with pushing measurement switch
