100
・
Before checking or replacing the fuses, be sure to turn off the power switch and
remove the power cord from the receptacle outlet.
・
Only use fuses as specified below. Other fuses must NOT be used.
・
For spare fuses, contact your local dealer.
Littelfuse's time-lag fuse,
f
5 x 20 mm
250V/T1.6AH (021501.6XP)
CAUTION
7-3
Replacing the Fuses
CAUTION
If the power lamp does not light up when the power switch of the station is set to ON (“I”
position), the fuses may have blown.
Remove the fuse holder by applying a small flat-blade screwdriver or other tool to the tabs
on both sides of the fuse holder.
Remove the two fuses from the fuse holder and check if they have blown. Replace the fuses
if blown.
Spare fuses are in the accessory case. See “2-3 Station”.
