31
3-2-2 Printer
1.
Turn the printer over.
2.
Open the battery cover by pressing
①
with your fingers and sliding in direction
②
.
3.
To make the indication
▽
of the battery pack to the direction of
③
, fit in the battery
pack with the clicks, slide the battery pack to
④
to install.
4.
To remove the battery pack, slide it to reverse direction of
④
.
5.
To close the battery cover, slide it in the opposite direction of
②
.
3-3
Setting Up the Instrument
1.
Open the carton box, take out the main unit, the station, the printer and Accessories.
2.
Place the station on flat surface.
3.
In the accessory case of the station, put in model eye and spare fuse.
4.
Connect the power cord to AC inlet (use power cable enclosed).
5.
Make sure that the power switch on the station is set to OFF
“
( power plug into a power outlet.
○”
side), and plug the
6.
On the station, set the power switch to ON (“|” side). The power indicator lamp will
light in blue.
7.
Install the battery pack onto the main unit (see “3-2-1 Main Unit”), and set in the
station, battery charge will start automatically.
When using the battery pack for the first time, be sure to charge it. The battery pack is
not charged at the time of purchase.
8.
Set the printer at the side of the station.
Setting the printer is easily made to incline the printer.
If optional spare battery is purchased, set the battery pack in the printer (see “3-2-2
Printer”) for battery charge.
9.
Install the print paper roll onto the printer. (see “7-2 Replacing the Print Roll”)
③
④
①
②
Clicks
