RigExpert IT-24
4.1. Return loss and SWR
4.1.1. Single-point measurement
In this mode, antenna or any other load is connected to the RP-SMA socket. Once this
mode is used for the first time, a simple calibration is required.
The following screen shot illustrates the return loss and SWR measurement mode:
The
(left) and
(right) keys change the operating frequency. To hold the
measurement, press the
(ОК) key: you will then see the “H” pictogram in the top
right corner of the screen. Pressing the
(menu) key will display a help screen for
this measurement mode.
9
4. Measurement
modes
