User’s manual
Signals, which are different by level but are transmitted at the same frequency, can
all be easily seen at the density graph. In this example, you can see a signal of the
“beacon” at the 1st Wi-Fi channel. The same channel is used to transfer data (with
smaller signal levels). Some other Wi-Fi channels are also busy.
The data can be accumulated on the screen for a long time: minutes and even hours.
This useful feature will let you see even those transmitters, which were active for a
short period of time only. This will take into the account any Wi-Fi activity, as well as
industrial and domestic interference. Less crowded channels can then be chosen for
your own wireless network.
In the following example, data is collected for 10 minutes. The screen shot shows
that the upper part of the Wi-Fi band is less busy (Wi-Fi channels 11 and up) and is
preferred for your own wireless network.
22
