RigExpert IT-24
Single-point return loss and SWR (standing
wave ratio) measurement:
• Frequency range: 2.3 … 2.6 GHz
• Frequency resolution: 1 MHz
• Return loss measurement range: >2 dB
• SWR measurement range: 1 … 10
• Output power in this mode: about +5 dBm
• Measurement error limits are displayed by
the shaded area on the chart. These limits
are valid for the 2.4…2.5 GHz range.
SWR graph:
• 4 frequency sub-bands: 2.3…2.4 GHz,
2.4…2.5 GHz, 2.5…2.6 GHz, 2.3…2.6 GHz
• SWR display range: 1 … 5
Transmitter power measurement:
• Frequency range: 2.3 … 2.6 GHz
• Power limits: -20 … +25 dBm (0.01 …
300 mW)
• Input SWR of the power meter: less
than 1.5
• Measurement error: better than ±2 dBm
Spectrum analyzer:
• Display modes: peak and average levels,
density graph, waterfall
• Frequency range: 2.3 … 2.6 GHz
• Bandwidth of sub-bands: 100 MHz
(5 overlapping sub-bands), 20 MHz (30
overlapping sub-bands), 10 MHz (60
overlapping sub-bands)
• Input signal levels: about -100 … -20 dBm
• Signal level marks: 10 dB/div
• Receive preamplifier: -10 dB, 0 dB, +6 dB
Size:
17•8•3 cm
Operating temperature:
0…40 °C
Weight including batteries:
350 g.
RF connectors:
• RP-SMA for SWR and spectrum
modes
• SMA for power measurement
Interface:
• Color TFT display, 320•240 pixels
• Water-proof keypad, 9 keys
• Multi-language menus and help
screens
• Computer connection via USB port
Power:
• 4 pieces of AAA rechargeable or
alkaline batteries (the charger is not
included with the tester; batteries
are not charged inside the tester)
• From a computer USB socket
5
2. Specifications
