Rigaku Progeny, User Manual

Page: 108 / 122

Maintenance and Troubleshooting 101
1006232_RevD
Select … To see …
Temperature Detector Set Temperature
Power Battery Remaining Power
4. Select (Back) to return to the Instrument Settings screen.
5. Select (Back) to return to the Main screen.
Verifying the Instrument Serial Number
When troubleshooting Progeny Analyzers, you may need to verify that the serial number listed on the
instrument settings Information screen matches the hardware serial number on your instrument’s
Serial Number label.
1. Access the instrument settings Information screen (see “Cleaning Your Instrument
2. Maintaining a clean Progeny Analyzer helps ensure that cross-substance scanning issues do not
occur. After scanning open-air samples or after the lens aperture becomes soiled, clean your
instrument with pre-packaged sanitary wipes featuring at least 70% Isopropyl alcohol cleaning
solutions.
3. Log off, remove the battery, and close the battery compartment.
4. With 70% Isopropyl alcohol sanitary wipes, clean all loose or stuck-on materials off the surfaces
of your instrument from front to back in the following sequence:

Laser aperture

Front

Top

Sides

Bottom

Back
5. When finished, let your instrument air dry.
6. Viewing Instrument Runtime Information”) to find the Serial Number and compare to the SN
located on the label on the back of the instrument.
7. If the numbers do not match, contact RAD or your local RAD representative.