SmartLab: Automated Multipurpose X-ray Diffractometer
99
Measurements
This section introduces basic operating procedures for typical measurements. For
detailed information, refer to the
SmartLab Guidance Reference Manuals
, the Parts,
and Package Measurements Help Topics of the online help section of the
SmartLab
Guidance software
.
Preparing for measurements
1
Make sure that the OPERATE lamp on the main panel is lighting up in
green.
2
Launch SmartLab Guidance. Click Package Measurement under the
Task menu.
3
Click the Startup button to turn on the x-ray.
For information on the startup procedure, refer to Section 2.1 of the CBO Maintenance
Package Measurement Help Topic of the online help section of the
Smartlab Guidance
software
.
Setting the hardware configuration
1
Click Hardware Configuration in the Options menu to open the
Hardware Configuration dialog box.
