8
Shafts Geometry Measurement Machine. RF800 Series
RF800 [Revision 1.0.0] 01.08.2018
7. Software
7.1. Main window
After the machine is powered on, the software is loaded and the main window
appears.
Button
Assignment
Settings
Set the measurement parameters.
Calibration
Perform the calibration procedure.
Measurement
Control the measurement process.
Database
View the database.
7.2. Settings
Only qualified users are allowed to change settings, so when you tap the
Settings
button, you will need to enter a password (by default: 1111).
Enter the password and tap
Ok
. The
Settings
window appears:
