16
Shafts Geometry Measurement Machine. RF800 Series
RF800 [Revision 1.0.0] 01.08.2018
·
Select (
Select
button), or add (
Add
button), and then select the workplace
number.
·
Select the controlled diameter from the
Diameter
drop-down list.
·
Describe the workplace in the
Description
text box.
7.3. Calibration
To perform the calibration of the machine, go to the main menu and tap
Calibration
.
Select the shaft that will be used as the caliber. Tap
Accept
. The program displays
the description of the selected shaft.
Install the shaft into the machine, and tap
Calibration
. The shaft will be scanned. If
necessary, parameters of the optical micrometers will be corrected automatically, and then
the shaft will be scanned again in order to test the machine. If successful, the following
window appears:
