Riftek IDK Series, User Manual

Page: 4 / 15

Wheel diameter measuring gauge, IDK
IDK [Revision 2.2] 4th September 2017
4
5. Example of item designation when ordering
IDK-S/B-MIN/MAX-X
Symbol Description
S Position of measurement, mm
В
Base, mm
MIN Bottom of measuring range, mm
MAX Up of measuring range, mm
Х Position of indication. А – Indication is at the side of side supports (figure А), В
– Indication is at opposite side (figure В)
Example: IDK-70/250-850/1260-
А.
Position of measurement
– 70 mm; base of the gauge –
250 mm; bottom of measuring range
– 850 mm; up of measuring range – 1260 mm; po-
sition of indication
– А.
Fig.А
Fig.В
6. Complete set to be supplied
Name Quantity Weight, kg
Wheel diameter measuring gauge IDK series 1 piece 0,5
Charger 1 piece 0,2
Manual 1 piece
Case 1 piece
Calibration tools (option) on request
Flat block RF510.11.000 (fig.2)
-
Reference wheel block for calibrating RF510.11.XXXX (fig.3) -
7. Design
Electronic gauge contains two ball supports to place the gauge onto the roll sur-
face, two side supports to base the gauge to the wheel edge and a measuring tip.
There are a digital numeric display and control buttons on the front panel of the
gauge. “Charge” connector for charging device connection is situated on the top panel of
the gauge. Accumulator batteries (two AAA 1,2V) are a source of power supply. The ac-
cumulator batteries are easy to change too.