15
INSTALLER
INSTALLER
3.3
Handling
9
Before handling the appliance and removing the packaging,
wear PPE and use tools suitable for the appliance's size and
weight.
The product can be moved in two ways:
− Using a forklift truck with adequate lifting capacity.
− Using a hoist with adequate lifting capacity;
HANDLING WITH A FORKLIFT
Two pockets (A) for handling with a forklift are positioned in the
lower part and accessible from both sides of the boiler.
A
A
MOVING WITH A HOIST
Two lifting points (B) are provided for lifting with crane on the
upper part of the boiler. Proceed as follows to move the boiler
and remove the packaging:
− Remove the protective film;
− Move the boiler to the place of installation, use a crane
for lifting and using only the lifting accessories provided
with it.
− If chains are used to lift the boiler, make sure that at least
two of the chains are load-bearing.
− Lift with the utmost care.
− Maintain an angle less than 45 degrees from the vertical
when lifting the boiler with chains or ropes.
− The crane must be operated by trained personnel.
9
The packaging material must be disposed of carefully and
must not be abandoned, as it is a source of potential dan-
ger.
B
B
9
Risk of injury resulting from the transport of heavy loads and
inadequate fastening of loads for transport.
