20138630
48
GB
Appendix - Accessories
Output power regulator kit for modulating operation
With the modulating operation, the burner continually adapts the
power to the heat request, ensuring a high level of stability for the
parameter controlled: temperature or pressure.
Two components should be ordered:
–
the output power regulator to be installed on the burner;
–
the probe to be installed on the heat generator.
Software diagnostics kit
A special kit is available that, by a link to a PC, shows the burner
life together with operating hours, type and number of lockouts,
no. of motor rpm and safety parameters.
To display the diagnostics proceed as follows:
connect the kit (supplied separately) to the appropriate
socket on the control box. Reading of the information begins
when the software programme included in the kit starts.
Kit display LCD AZL 2... for control box LME 71... with PME 71.901
B
Appendix - Accessories
Burner
Output power regulator
Code
RX 500 S/PV
RWF50.2
20095185
Burner
Probe
Adjustment field
Code
RX 500 S/PV
Temperature PT 100
- 100 ÷ 500° C
3010110
Pressure 4 ÷ 20 mA
0 ÷ 2.5 bar
3010213
Pressure 4 ÷ 20 mA
0 ÷ 16 bar
3010214
Pressure 4 ÷ 20 mA
0 ÷ 25 bar
3090873
Burner
Code
RX 500 S/PV
on demand
Burner
Code
RX 500 S/PV
20109292
WARNING
The installer is responsible for the addition of any
safety device not foreseen in this manual
D9001
Fig. 28
