Riello RS 200/EV BLU TL, Installation, Use And Maintenance Instructions

Page: 15 / 52

13
20095199
GB
Technical description of the burner
Electrical connection of flame detector
It is important for signal transmission to be almost totally free
of any disturbances or loss:

always separate the detector cables from the other cables:
– line capacitance reduces the magnitude of the flame sig-
nal.
– Use a separate cable.

Respect the allowed cable lengths.

The grounding of the burner must be in compliance with the
rules in force; the grounding of the boiler alone is not
enough.
Technical data
Control box Mains voltage AC 230 V -15 % / +10 %
Mains frequency 50 / 60 Hz ±6 %
Power absorption < 30 W (normal)
Safety class I, with components in compliance with II and III, ac-
cording to DIN EN 60730-1
Load on ‘input’
terminals F1 unit fuse (internal) 6,3 AT
Main fuse of perm. network (external) Max. 16 AT
Undervoltage
–
Safety switch-off from operating position to mains
voltage
– Restart when mains voltage picks up
< AC 186 V
> AC 195 V
Input currents and input voltages
–
UeMax
– UeMin
– Iemax
– IeMin
UN +10%
UN -15%
1.5 mA peak
0.7 mA peak
Voltage detection
–
On
– Off
AC 180...253 V
< AC 80 V
Load on ‘output’
terminals Total load on the contacts
– Mains voltage
– Total unit input current (safety circuit)
- Fan motor contactor
- Ignition transformer
- Valve
AC 230 V, 50 / 60 Hz
Max. 5 A
Single contact loading
Fan motor contactor
–
Rated voltage
– Nominal current
– Power factor
AC 230 V, 50 / 60 Hz
2A
cos

> 0.4
Alarm output
–
Rated voltage
– Nominal current
– Power factor
AC 230 V, 50 / 60 Hz
1A
cos

> 0.4
Ignition transformer
–
Rated voltage
– Nominal current
– Power factor
AC 230 V, 50 / 60 Hz
2A
cos

> 0.2
Fuel valve
–
Rated voltage
– Nominal current
– Power factor
AC 230 V, 50 / 60 Hz
2A
cos

> 0.4
Display operation
–
Rated voltage
– Nominal current
– Power factor
AC 230 V, 50 / 60 Hz
0,5A
cos

> 0.4