Riello RS 200/EV BLU TL, Installation, Use And Maintenance Instructions

Page: 10 / 52

20095199
8 GB
Technical description of the burner
3.6 Maximum dimensions
The dimensions of the burner are shown in Fig. 1.
Bear in mind that inspection of the combustion head requires the
burner to be opened and the rear part drawn back on the guides.
The dimensions of the open burner are indicated by position I.
Tab. E
3.7 Firing rate
The maximum output is chosen within area A of the diagram
(Fig. 2).
The minimum output must not be lower than the minimum limit
of the diagram.
Fig. 1
D1206
mm A B C D E F G H I L M N O
RS 200/EV BLU TL 732 427 305 555 872 503 222 430 1587 230 141 260 2”
CAUTION
The firing rate (Fig. 2) refers to the operation with
fuel G20 - G25.
In case G31 is used, the minimum output goes
from 570 to 630 kW.
WARNING
The firing rate (Fig. 2) was obtained considering a
room temperature of 20°C and an atmospheric
pressure of 1013 mbar (approx. 0 m above sea
level), with the combustion head adjusted as
shown at page 24.
Fig. 2
D11719
Thermal power
Co
mb
usti
on chambe
r
pressure -
mba
r