Riello RS 200/EV BLU TL, Installation, Use And Maintenance Instructions

Page: 31 / 52

29
20095199
GB
Installation
4.11.1 Motor cable shield
Key (Fig. 29)
1
Power supply cable (from the inverter)
2 Single-phase power supply cable
4.11.2 Revolution sensor adjustment
The revolution sensor E)(Fig. 30) is placed inside the fan motor
cup A) and measures the number of revolutions of the motor via
the reading plate B), fixed rigidly to the motor.
For its regulation, proceed as follows:

loosen the 4 screws C);

with a plain screwdriver, move the plate in the radial direc-
tion D);

when the adjustment is ready complete, tighten the screws
C).
WARNING
It is important to shield the motor cable 1) as indi-
cated in Fig. 29.
WARNING
The dimension shown in Fig. 30 must be respect-
ed.
Fig. 29
20081493
Fig. 30
20078649