Riello RS 1300/E C01, Installation, Use And Maintenance Instructions

Page: 20 / 56

20089387 18 GB
Installation
5.4 Operating position
5.5 Removing the shutter lockout screws
5.6 Preparing the boiler
5.6.1 Boring the boiler plate
Pierce the closing plate of the combustion chamber, as in Fig. 13.
The position of the threaded holes can be marked using the ther-
mal insulation screen supplied with the burner.
WARNING

The burner is designed to work only in posi-
tions
1 and 4 (Fig. 11).

Installation 1 is preferable, as it is the only
one that allows the maintenance operations
as described in this manual.

The installation 4 permits the operation, but
makes the maintenance and inspection oper-
ations of the combustion head more difficult.
DANGER

Any other position could compromise the cor-
rect operation of the appliance.

Installations 2, 3 and 5 are forbidden for
safety reasons.
2 3 4 5 1
S9249
Fig. 11
WARNING
Remove the screws 1)-2) and nuts before fitting
the burner onto the boiler (Fig. 12).
Replace them with screws 3) M12x16 supplied as
standard.
1
2
2
1
3
3
Fig. 12
20094549
Ø
(1300-1600)
Ø 620 (2000)
580
620
= =
220
= =
2 1 5
= =
2 0
6 4 5
= =
Fig. 13
20094550