19
20123781
GB
Installation
5.7
Securing the burner to the boiler
Insert the thermal protection supplied with the blast tube 4).
Insert the entire burner on the boiler hole, previously fitted,
as in Fig. 15, and fix it with the screws supplied.
5.8
Access to head internal part
In order to reach inside the combustion head (Fig. 17) proceed as
follows:
disconnect the gas servomotor socket 1)
disconnect the head movement leverage 2)
remove the 4 fixing screws 3)
open the burner on the hinge
disconnect the electrode cables 4)
remove the screw/gas pressure socket 5) of the head
pull out the inner part of the head 6)
Prepare a suitable lifting system using rings
3)(Fig. 16).
WARNING
The seal between burner and boiler must be
airtight.
3
8
7
4
2
5
1
1
Fig. 16
20119768
Be careful as some drops of fuel may leak out dur-
ing this phase.
6
1
5
2
4
3
20119870
Fig. 17
Summary of Contents for RS 1000/EV BLU
