INSTAllATION
9
—
humid locations or positions where the unit could come
into contact with water
—
locations with oil vapours
—
locations with high frequency contamination
9
Avoid placing the unit less than 1 metre away from radio and
video systems.
2.7 Recommended distances
The distances for the device installation and maintenance are
shown in the figure. The indicated spaces are necessary in order
to prevent the airflow from being blocked, as well as to allow
normal cleaning and maintenance operations to be carried out.
100
100
2300
15
0
2.8 Installation on old systems or systems in need
of upgrading
When
R
AMW ST is installed on old systems or systems in
need of upgrading, it is recommended to ensure that:
—
the electrical system is compliant with the applicable reg-
ulations and has been installed by qualified professionals
9
In the event of a replacement, the system must be inspected
by the designer or by another competent person, and must
be compliant with the technical requirements, as well as
the current legislations and regulations.
9
The manufacturer shall bear no responsibility for any dam-
ages caused by incorrect system installation.
2.9 Positioning
R
AMW ST devices are supplied with a metallic support to fix
them to the wall:
MODEl 25 - 35
1 Fastening slots
2 Fastening holes
3 Metal support
4 Equipment overall dimensions
5 Metal support central axis
6 Equipment central axis
25
1
28
0
17
0
354
820
19
1
2
3
4
5
6
502
MODEl 50
1 Fastening slots
2 Fastening holes
3 Metal support
4 Equipment overall dimensions
513
644
28
5
18
1
1
2
3
318
1008
4
MODEl 70
1 Fastening slots
2 Fastening holes
3 Metal support
4 Equipment overall dimensions
711,2
834
308,8
178,8
1
2
3
33
5
1125
4
9
Place the metallic support on a level surface that is capable
of supporting its weight
Summary of Contents for R32 Series
Page 27: ......
