Riello R32 Series, Installation And Technical Service Instructions

Page: 7 / 28

INSTAllATION
7
2 INSTALLATION
9
Ensure that the installation and operation sites are prop-
erly ventilated in order to disperse any gas leaks that could
cause flames during activities with intense heat generation
and high temperature.
9
Avoid proximity to sources of ignition in continuous op-
eration (open flames, gas household appliances, electric
stoves, lit cigarettes, etc).
9
Use equipment suitable for the system refrigerant.
9
Use an electronic leak finder properly calibrated for the sys-
tem refrigerant.
0
It is forbidden to use leak finders with halogen lamps.
2.1 Receiving the product
R
AMW ST is supplied in a single package, protected by a
cardboard packaging, polystyrene elements and a polyethylene
film.
The following items can be found inside the packaging:
Document envelope:
— Instruction's book for the installer and for the Technical
Service in Italian
— Instruction's book for the installer and for the Technical
Service in English
— user instruction booklet in Italian
— user instruction booklet in English
— Warranty/Spare parts labels.
—
contact sheets
It is also supplied as kit:
— remote control
— no. 2 AAA batteries
— support for remote control
— no. 2 screws for remote control support
— no. 1 antibacterial filter (green)
— no. 1 photocatalytic filter (black)
— no. 10 screws and anchor bolts
— flare nut for liquid pipe
— flare nut for gas pipe
— protective insert for gas passageway hole
— condensate discharge pipe
9
The Instruction book comes with the equipment and it
should be taken, read and kept carefully.
9
The document envelope must be kept in a safe place. Any
duplicate must be requested from Riello S.p.A. which re-
serves to charge the cost.
2.2 Labels positioning
A Package label
A
A
2.3 Dimensions and weight
L
P
H
Model 25 35 50 70
Packaging dimensions
H
355 355 403 418 mm
L 909 909 1085 1206 mm
P 279 279 329 342 mm
Weight 11,0 11,0 14,4 17,5 kg