Riello multipower BTC 170, User Manual, Page: 77 / 84

‐ 77 ‐
PM ALARM CODES
[A13]
BYPASS VOLT. ABNORMAL L1
[A14] BYPASS VOLT. ABNORMAL L2
[A15] BYPASS VOLT. ABNORMAL L3
[A16] BYPASS FREQ. ABNORMAL
[A18] BYPASS VOLTAGE FAIL
[A19] OUT. PEAK OVERCURRENT L1
[A20] OUT. PEAK OVERCURRENT L2
[A21] OUT. PEAK OVERCURRENT L3
[A22] LOAD > USER THRESHOLD L1
[A23] LOAD > USER THRESHOLD L2
[A24] LOAD > USER THRESHOLD L3
[A25] OUTPUT SWITCH OPEN
[A26] (+) BATTERY NOT PRESENT
[A27] (-) BATTERY NOT PRESENT
[A29] INT TEMP. SENSOR FAULT
[A30] INTERNAL UNDERTEMP.
[A31] INTERNAL OVERTEMP.
[A32] UNDERTEMP. POWER L1
[A33] UNDERTEMP. POWER L2
[A34] UNDERTEMP. POWER L3
[A39] REPLACE (+) BATTERY
[A40] REPLACE (-) BATTERY
[A47] DIFFERENT FIRMW. VERSION
FAULT
[F01] INTERNAL COMM. ERROR
[F02] MAINS PHASE REVERSED
[F03] INP.FUSE/CONTACT FAIL L1
[F04] INP.FUSE/CONTACT FAIL L2
[F05] INP.FUSE/CONTACT FAIL L3
[F06] INPUT CONTACT LOCKED L1
[F07] INPUT CONTACT LOCKED L2
[F08] INPUT CONTACT LOCKED L3
[F09] DC (+) BUS PRECHARGE FAIL
[F10] DC (-) BUS PRECHARGE FAIL
[F11] BOOSTER FAULT
[F12] BYPASS PHASE REVERSED
[F13] BOOSTER FAILURE
[F14] INV.SINEWAVE ABNORMAL L1
[F15] INV.SINEWAVE ABNORMAL L2
[F16] INV.SINEWAVE ABNORMAL L3
[F17] INVERTER FAULT
[F19] (+) BATTERY OVERVOLTAGE
[F20] (-) BATTERY OVERVOLTAGE
[F21] (+) BATTERY UNDERVOLTAGE
[F22] (-) BATTERY UNDERVOLTAGE
[F23] OUTPUT OVERLOAD
[F24] BYPASS MODULE FAULT
[F25] POWER ABSORPTION
[F26] OUTPUT CONTACT LOCKED L1
[F27] OUTPUT CONTACT LOCKED L2
[F28] OUTPUT CONTACT LOCKED L3
[F29] OUT.FUSE/CONTACT FAIL L1
[F30] OUT.FUSE/CONTACT FAIL L2
[F31] OUT.FUSE/CONTACT FAIL L3
[F32] BATTERY CHARGER FAULT
[F33] BATTERY MEASURE ERROR
[F34] POWER OVERTEMPERATURE
[F36] FAN FAILURE
[F37] BATT. CHARGER OVERTEMP.
[F39] VDC BUS MEASURE ERROR
[F40] (+) BATTERY FUSE BROKEN