Riello INSIEME EVOe 25 B/70 LN, Installation And Maintenance Manual

Page: 16 / 64

16
INSTALLATION
To move the boiler manually, proceed as follows:
− Unscrew the screws (1) securing the boiler to the pallet;
− remove the fixing screw (2) and extract the front panel
(3).;
Use lifting equipment suitable for the weight involved.
1
1
3
2
− lift the thermal unit by inserting two pipes (3) with a di-
ameter of 1” through the suitable holes (4) on the upper
part of the thermal unit.
4
3
9
Take care because the boiler might swing when lifted.
2.4 Installation premises
The thermal unit INSIEME EVOe 25 B/70 LN must be installed in
rooms with appropriately sized vent openings which comply
with the Technical Standards and Regulations in force in the
place of installation.
9
When installing the boiler, allow sufficient space around it
to access all safety and control devices and to permit easy
maintenance.
9
Check that the electric protection level of the appliance is
suitable for features of the room where it is installed.
9
Make sure that comburent air is not contaminated by sub-
stances containing chlorine or fluorine (elements found in
sprays, paints, detergents etc.).
0
These boilers must be installed indoors. They are not de-
signed for outside use.
0
Do not obstruct or restrict the air vents in the room where
the boiler is installed. A free air supply is essential for correct
combustion.